EnGenius Network EAP1750H 802.11ac 3x3 Dual Band Ceiling-Mount Wireless Access Point-WDS
Hardware
RF: 2.4 and 5 GHz Frequency Bands
Standards: IEEE 802.11a/n/ac on 5 GHz IEEE 802.11b/g/n on 2.4 GHz
Radio I: 11b/g/n: 2.412-2.484 GHz
Radio II: 11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 1300 Mbps in 5 GHz Up to 450 Mbps in 2.4 GHz
Memory: 128MB
Flash Memory: 16MB
Antenna Array:
Integrated 3D Sectorized Antenna Array
4 dBi on 2.4 GHz
5 dBi on 5 GHz
Physical Interface:
1 x RJ-45 Gigabit Ethernet Port (10/100/1000 Mbps)
1 x Reset Button
1 x Power Connector
LED Indicators:
Power
WPS
2.4 GHz
5 GHz
LAN
Power Requirements:
Power Supply: 90 to 240 VDC +/- 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations "OFDM:
BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
Software
Topology: Infrastructure/Ad-Hoc
Operation Modes: Access Point, WDS Bridge, WDS Access Point
Multiple BSSID: Supports up to 8 BSSIDs per radio
LAN:IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging:Supports 802.1q SSID-to-VLAN tagging
Spanning Tree:Supports 802.1d Spanning Tree Protocol
Wireless:
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
QoS:WMM (Wireless Multimedia)
VPN:Pass-through (PPTP, L2TP, IPSec)
WPS:Software only
Management
Tx Power Control:Adjust transmit power by dBm
Configuration:Web-based configuration (http)/Telnet
Telnet Server: CLI
Firmware Upgrade: Via web browser, settings are reserved after upgrade
Administrator Setting: Administrator Username and Password Change
Reset Setting:
Reboot (press 1 second).
Reset to factory default (press 10 seconds)
System Monitoring: Status Statistic and Event Log
Certifications
FCC, IC
Item Dimension (L"xW"xH"):
12 x 9 x 3
Weight:
1.95 lb
Warranty Information:
1 Year
RF: 2.4 and 5 GHz Frequency Bands
Standards: IEEE 802.11a/n/ac on 5 GHz IEEE 802.11b/g/n on 2.4 GHz
Radio I: 11b/g/n: 2.412-2.484 GHz
Radio II: 11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 1300 Mbps in 5 GHz Up to 450 Mbps in 2.4 GHz
Memory: 128MB
Flash Memory: 16MB
Antenna Array:
Integrated 3D Sectorized Antenna Array
4 dBi on 2.4 GHz
5 dBi on 5 GHz
Physical Interface:
1 x RJ-45 Gigabit Ethernet Port (10/100/1000 Mbps)
1 x Reset Button
1 x Power Connector
LED Indicators:
Power
WPS
2.4 GHz
5 GHz
LAN
Power Requirements:
Power Supply: 90 to 240 VDC +/- 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3at)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/2A
Modulations "OFDM:
BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
Software
Topology: Infrastructure/Ad-Hoc
Operation Modes: Access Point, WDS Bridge, WDS Access Point
Multiple BSSID: Supports up to 8 BSSIDs per radio
LAN:IP (check validity and DHCP server IP range) MAC
SSID-to-VLAN Tagging:Supports 802.1q SSID-to-VLAN tagging
Spanning Tree:Supports 802.1d Spanning Tree Protocol
Wireless:
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
QoS:WMM (Wireless Multimedia)
VPN:Pass-through (PPTP, L2TP, IPSec)
WPS:Software only
Management
Tx Power Control:Adjust transmit power by dBm
Configuration:Web-based configuration (http)/Telnet
Telnet Server: CLI
Firmware Upgrade: Via web browser, settings are reserved after upgrade
Administrator Setting: Administrator Username and Password Change
Reset Setting:
Reboot (press 1 second).
Reset to factory default (press 10 seconds)
System Monitoring: Status Statistic and Event Log
Certifications
FCC, IC
Item Dimension (L"xW"xH"):
12 x 9 x 3
Weight:
1.95 lb
Warranty Information:
1 Year
