your message here...
Cart 0
Supermicro Barebone Server SYS-5018D-MTF 1U Xeon E3-1200 LGA1150 C224 SATA PCI Express DDR3 32GB 350W

Supermicro Barebone Server SYS-5018D-MTF 1U Xeon E3-1200 LGA1150 C224 SATA PCI Express DDR3 32GB 350W

$645.49

Motherboard
Super X10SLM-F
Processor/Cache
CPU
Intel Xeon processor E3-1200 v3 family, 4th Gen Core i3, Pentium, Celeron processors
Socket H3 (LGA 1150)
System Memory
Memory Capacity
4x 240-pin DDR3 DIMM sockets
Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
8GB, 4GB, 2GB, 1GB
Memory Voltage
1.5 V
Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset
Intel C224 Express PCH
SATA
SATA3 (6Gbps) w/ RAID 0, 1, 10, 5
SATA2 (3Gbps) w/ RAID 0, 1
IPMI
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Aspeed AST2400 BMC with 10/100/1000Mbps
Network Controllers
Intel i217LM + Intel i210AT Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
VGA
Aspeed AST2400 BMC
Input / Output
Serial ATA
4x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports
SATA DOM Power Connector
LAN
2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB
4x USB 3.0 ports (1 Type-A, 2+1 via header)
6x USB 2.0 ports (4 rear, 2 via header)
VGA
1x VGA port
Serial Port / Header
1x Fast UART 16550 serial port
1x internal header
PC Health Monitoring
Voltage
Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
Total of five 4-pin fan headers supporting up to 5 fans
5x fans with tachometer status monitoring
Status monitor for speed control
Status monitor for on/off control
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature
Monitoring for CPU and chassis environment
CPU thermal trip support
FC temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED
CPU / System Overheat LED
+5V Standby alert LED
Other Features
Chassis intrusion detection
Chassis intrusion header
Form Factor
1U Rackmount
Available Colors
Black
Front Panel
Buttons
Power On/Off button
System Reset button
LEDs
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Ports
2x USB ports
1x Serial COM Port
Expansion Slots
PCI-Express
1x PCI-E 3.0 x8 (in x16) Full-height slot
Drive Bays
Hot-swap
4x 3.5" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay
Slim optical drive (optional)
Backplane
SAS2/SATA3 HDD Backplane (SAS support requires optional SAS controller)
System Cooling
Fans
4x 4cm 12,500 RPM PWM fans
Optional fans to cool add-on cards
Power Supply
350W AC power supply w/ PFC
AC Voltage
100-240 V, 50-60 Hz, 4.2-1.8 Amp
+5V
18 Amp
+5V standby
3 Amp
+12V
29 Amp
+3.3V
15 Amp
Certification
Gold Certified
System BIOS
BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
Management
Software
IPMI (Intelligent Platform Management Interface) v2.0 with KVM support
SuperDoctor III
Watch Dog
NMI
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Power-on mode for AC power recovery
Internal/External modem ring-on
RoHS
RoHS2 (2011/65/EU) Compliant

Share this Product


More from this collection